Telecom Behnke 20-0001B-IP Anleitung Seite 40

Instructions for Behnke 20-0001B-IP, 20-0014B-IP, 20-0016B-IP
GB
Introduction
Cleaning and maintenance
They have installed high-quality Behnke
products with front panels made of different
materials. All materials should be cleaned with
a suitable cleaning agent in regular, sufficiently
short intervals, depending on the material. This
prevents early ageing and patina formation on
the surface. You can find the corresponding care
instructions for surfaces delivered by Behnke on
our homepage: www.behnke-online.de/
downloads/pflegehinweise
Original Behnke components
Please only use Behnke components for
accessories or spare parts – this also applies
to POE injectors! This is the only way to ensure
trouble-free operation. Only install or assemble
the electronics in the supplied housings. If
an electronics board is installed in third-party
housings or without the provided housings, we
cannot guarantee functioning and approval of
your Behnke door intercom station.
Configuration
The SIP stations are configured via web frontend
(for system requirements, see page 38).
Alternatively, some settings such as volume
etc. can be configured via telephone with DTMF
dialling or the Behnke keypad. Information on
operation, configuration, technical data can be
found in the detailed technical manual for the
Behnke door intercom station. To do this, select
the appropriate menu item in the web frontend
of the door intercom station. Further important
information about the configuration can be
found in the symbols marked with a ? .
40
Regulations
Please observe the relevant regulations for the
installation of telecommunications and elec-
trical systems and the valid, current standards
and rules of network technology!
www.behnke-online.de