Battery Safety - Husqvarna LB 548i Bedienungsanweisung

To do a check of the safety key
The safety key connects the
battery that supplies the motor
with power.
• Start and stop the motor.
If the safety key operates
correctly, the motor can only
start when the key is in the
safety lock.
Motor brake handle
The motor brake handle stops
the motor. When the motor
brake handle is released, the
motor stops.
To do a check of the motor
brake, start the motor and then
release the motor brake handle.
If the motor does not stop in
3 seconds, let an approved
Husqvarna service agent adjust
the motor brake.
To examine the start inhibitor
Do a check of the start inhibitor
to make sure that it prevents
operation of the motor.
1630 - 004 -
1. Push the motor brake handle
in the direction of the
handlebar. The start inhibitor
stops the movement.
2. Push the start inhibitor out.
3. Release the start inhibitor
and make sure that it goes
back to its initial position.

Battery safety

WARNING: Read the
warning instructions that
follow before you use the
product.
• Use Husqvarna rechargeable
batteries as a power supply for
related Husqvarna products
only. To prevent injury, do not
use the battery as a power
supply for other devices.
• Do not use non-rechargeable
batteries.
• Risk of electrical shock. Do not
connect the battery terminals
to keys, coins, screws or other
metal. This can cause a short
circuit of the battery.
11