Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Channel selector switch 4
A switch for choosing the desired channel is located on the upper side of the
device.
1:
Operating frequency 3,8 MHz
2:
Operating frequency 3,3 MHz
3:
Operating frequency 2,8 MHz
4:
Operating frequency 2,3 MHz
How to attach the carrying cord / belt clip
The receiver includes a carrying cord and belt clip, which can be attached to
the rear side of the device. To attach the clip to the receiver, place the clip on
the hook
on the back of the device. Now turn the clip 180° until it snaps into
5
place.
Connect special accessories
You can connect the following products to the 3.5 mm audio output
»PR22+«:
- DIR under-the-chin receiver
- Unobtrusive earphones
- Lightweight headset
- Teleloop
Using the »PR22+«
Switch the device on by means of the volume control. The red LED lights up
when the device is switched on. Make sure that the connected audio source is
switched on and adjust the volume of the »PR22+« according to your prefer-
ence.
- Audio-Cable binaural
- Audio-Cable monaural
- Induction Link binaural
- Induction Link monaural
of the
6
English 11
Werbung
