FAFREES F-100 Bedienungsanleitung Seite 12

"-" Button: Long press the "-" key, the electric vehicle will enter the state of

boost. The electric car runs at a constant speed of 6 km/h. Release the "-" key,
the electric vehicle will immediately stop power output.
"+"and "-" Buttons: Press "+" or "-" Button to switch the power assisted speed,

thus changing the output power of the motor.
Light Button: Press the light button to turn on/off the headlight.

Personal Settings:
1. Press and hold the "+"and "-" buttons for more than 2 seconds to enter the
general settings interface;
2. (Only for Setting 4) Press and hold the "-" and "i" buttons for more than 2
seconds to enter the selection interface of general parameter settings;
3. Press the "+"or "-" button to switch the selection interface of general settings, and
then press "i" button to enter the parameter change state;
4. Press the "+"or "-" button key to select parameters you want;
5. Press the "i" button to save the parameter settings and return to the general
settings interface;
6. Long press the "i" button to save the parameter settings and exit the general
settings interface.
Setting 1: Single mileage clearing
Enter the below interface. Select tC-n to NOT clear the mileage data, and select tC-y
to clear the mileage data.
Setting 2: Backlight brightness setting
Enter the below interface. BL-1 is the darkest, BL-2 is the standard brightness, and
BL-3 is the brightest.
9