EN
Disconnect the appliance from the power supply
•
Do not use abrasive sponges or scouring pads as they may damage
the glass.
•
After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
•
A surface that is not kept suitably clean may reduce the sensitivity of
control panel buttons.
•
Use a scraper only if residues are stuck to the hob. Follow the scraper
manufacturer's instructions to avoid scratching the glass.
•
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
•
Salt, sugar and sand could scratch the glass surface.
•
Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow
the Manufacturer's instructions).
•
Spills of liquid in the cooking zones can cause the pots to move or vibrate.
•
After cleaning the hob, dry thoroughly.
Do not use alcohol-based products such as denatured alcohol.
Do not use alcohol-based products such as denatured alcohol.
MOVING THE TOP HEATING ELEMENT
1.
r emove the side accessory holder grills.
2.
p ull the heating element out a little ( Fig. 1) and
lower it ( Fig. 2 ).
3.
to reposition the heating element, lift it up,
pulling it slightly towards you, making sure it
comes to rest on the lateral support.
Fig. 1
Fig. 2
44
1.
2.
1.
.