LENCO LS-410 Bedienungsanleitung Seite 10

Installing the Lid
Insert the hinge pockets of the lid onto the hinges of the turntable.
Turntable Platter and Belt Setup
1. Turn the platter over and check the belt position.
Make sure that the drive
belt is looped in the
middle of the circle. The
drive belt located too
high or too low in this
circle may cause the
drive belt to fall off or
speed to be unstable.
2. Set the platter on the spindle.
Make sure the platter is fully seated on the spindle.
9