Using The Functions - DeLonghi G010612R Betriebsanleitung

RAPIDO•INT 28-11-2000 09:01

4. USING THE FUNCTIONS

INSTANT HEATING SYSTEM
By pressing the I H S button (fig 3) in conjunction with switches l and ll, an exclusive heating function is
activated which warms up your room rapidly and silently.
Turning the appliance on
Insert the plug into the electrical socket; turn the thermostat until it stops at the maximum position; turn on the
heater using one or a combination of switches as indicated in the table.
Regulation of the thermostat "P" (fig3)
When the room has reached the desired temperature, turn the thermostat slowly in an anticlockwise direction
until it arrives at the position where a click can be heard (or until the warning light turns off) and not beyond
this point.
The temperature selected in this way will be automatically regulated and maintained.
Anti-frost Function
With the thermostat in the
temperature is maintained and does not fall below circa 5°C, whilst using minimum energy.
Depressed
Buttons Activated Functions
Press the I button for normal heating
at minimum power
Press the II button for normal heating
at medium power
Press both the I and II buttons for normal
heating at the maximum power available
without the instant heat system
Press the I, II and Instant Heating System
IHS buttons for Rapid heating at
maximum power.
8
Pagina 8
*
position and the l and /or ll switches are pressed, this ensures that the room
Modes of Functioning
In this mode, it is possible to activate
the Anti-Frost function.
In this mode, it is possible to activate
the Anti-Frost function.
In this mode, it is possible to activate
the Anti-Frost function.
In this mode, we do not suggest
to activate the anti-frost function.