Safety Recommendations And Warnings - Lumatek LUMLED013 Bedienungsanleitung

4. SAFETY RECOMMENDATIONS AND WARNINGS

Warning! Carefully read the warnings below before using or working with the product! •
The LUMATEK 30W UV Supplemental LED light Bar produces UVB (near UV Erythemal) and UVA (near UV-black
light) electromagnetic radiation with wavelengths from 280 to 400 nm.
To avoid any biological affects in physical human body, please switch the power off when installing and/or
during the maintenance processes on your grow system.
If turning Off UV Bars won't be possible, all exposed skin should be covered with opaque material including
face, neck, head, hands, and arms. It is assumed that other body parts are covered if wearing proper labora-
tory attire; long pants, closed toe shoes, gloves, long sleeve lab coats and protective glasses.
Do not look directly at the light as the UVB radiation from the light fixture can damage eyes and skin.
Do not restrict the airflow across the fixtures to avoid any heat build-up which may reduce drastically the
lifetime of your UV supplemental LED bars.
Do not put the UV Supplemental LED Bar in contact with any surface while still ON.
Only use on plants.
• CAUTION! Ultraviolet Radiation (UV)
• Do not look directly into the UV light during operation
• Wear protective eyewear to avoid exposure to UV light
• Avoid direct skin & eye exposure to UV light
• Keep out of reach of children
• Do not open or disassemble the LED fixture as it contains no serviceable parts inside. Opening or modifying
the LED fixture can be dangerous and will void the warranty.
• Do not use the LED fixture when either the LED fixture or its power cable are damaged. Replace the power
cable with correctly rated cable only.
• Modifications to the cables can lead to unwanted electromagnetic effects which may make the product
not comply with legal requirements.
• Do not expose the LED fixture to:
Condensing humidity, heavy mist or direct spray;
Ambient temperatures outside the specified range;
Dust and contamination;
Direct sunlight during use or HID light that may heat up the driver.
• Always disconnect the LED fixture from mains before performing any maintenance.
• Always allow for a cool down period of at least 20-30 minutes before touching the LED fixture. Touching the
LED fixture when the fixture is lit or immediately after may result in burns!
• Natural convection removes heat away from the heatsink. In order for the system too properly cool itself, at
least 5cm of space is required between the fixture and the roof of your grow area.
• Do not use abrasive materials or aggressive cleaning agents to clean the LED fixture as this may damage
the secondary optics. Instead use a clean damp or dry fabric/cloth.
• Do not use the LED fixture near flammable, explosive or reactive substances. The LED fixture can reach
temperatures of 40ºC.
• Do not use sulphur vaporizers or water misters.
• The installation and use of the LED fixture is the responsibility of the end user. Incorrect use or installation can
lead to failure and damage to the LED fixture. Damage to the LED fixture and electronic circuitry as a result of
incorrect installation and use revokes the warranty.
5. CONTENTS
1 X MANUAL
[PLS NOTE:
POWER & DAISY-CHAIN CABLES
ARE SOLD SEPARATELY]
2 X METAL HANGING HOOKS
1 X 30W UV LED LIGHT BAR