Light Distribution Curve; Environment; Legal; Safety Recommendations And Warnings - Lumatek ATS300W Bedienungsanleitung

3.5 Light distribution curve

3.6 Environment

The LED fixture is intended to be used in climate-controlled grow rooms, indoor farms and greenhouses. The
product may be used in damp environments but may not be used in wet environments or outdoors.
The product will operate in ambient temperatures from -20ºC to 40ºC but will function at optimal level
between 20ºC to 30ºC.
The product will operate in 20% – 85% humidity, non-condensing.

3.7 Legal

This product is CE certified compliant with LVD and EMC directive test standards.
LVD;
EN 60598-1:2015+A1:2018
EN 60598-2-1:1989
EN 62031:2008+1:2013+A2:2015
EN 62493:2015
EN62471:2008

4. SAFETY RECOMMENDATIONS AND WARNINGS

Warning! Carefully read the warnings below before using or working with the product!
• Always adhere to the local rules and regulations when installing or using the LED fixture.
• Do not open or disassemble the LED fixture as it contains no serviceable parts inside. Opening or modifying
the LED fixture can be dangerous and will void the warranty.
• Do not use the LED fixture when either the LED fixture or its power cable are damaged. Replace the power
cable with correctly rated cable only.
• Modifications to the cables can lead to unwanted electromagnetic effects which may make the product
not comply with legal requirements.
• Do not expose the LED fixture to:
Condensing humidity, heavy mist or direct spray;
Ambient temperatures outside the specified range;
Dust and contamination;
Direct sunlight during use or HID light that may heat up the driver.
EMC;
EN 55015:2013+A1:2015
EN 61547:2009
EN 61000-3-2:2014
EN 61000-3-3:2013
Unit: cd
C0/180 , 114.3
C30/210 , 114.5
C60/240 , 114.3
C90/270 , 114.2