Pevino PG300S-B Bedienungsanleitung Seite 6

① Power on/off
② Function setting key
③ LED light on/off (ºC/ºF display)
④ Keyboard lock
⑤ Temperature control UP
① Power on/off:
Standby mode: short press the button to turn the power on and the system starts.
Boot state: Press button for 3 seconds. The display ⑦ shows the countdown 3-2-1, and the power is tuned off
on the system.
② Function setting key:
To set the temperature, press this key. Press the ⑤ ⑥ buttons to achieve the desired temperature.
③ LED light on/off + ºC/ºF conversion:
Every click of button turns LED lights on or off.
Boot state: Press button for 3 seconds. The temperature displays ⑦ ⑧ will shift between indicating Celsius or
Fahrenheit.
④ Keyboard lock：
Boot state: If the keyboard is not operated for more than 15 seconds it will automatically be locked. To unlock,
press for 3 seconds.
DISPLAY BOARD - OPERATING INSTRUCTIONS
PG300S-B
⑥ Temperature control DOWN
⑦ Temperature setting display
⑧ Measured temperature display
⑨ Display not in use on PG300S-B
⑩ Functions display