Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AFTER USE
-
Before turning off the device, turn off the motor and make sure that all moving parts have
come to a complete standstill.
-
After switching off the device, the rotation of the accessory must never be caused by a lateral
by applying force from the side.
USE
-
Assembly of accessories
! Unplug.
-
Simply press sponge pad G on the VELCRO polishing disc F.
-
Zum removal of the accessory handle reversed.
-
Before using the device, make sure that the accessories are properly mounted and tightly
tightened.
-
Check if the accessories are running freely by turning them by hand.
-
Test run of the device for at least 30 seconds at maximum idle speed in a safe position.
-
Stop any strong vibrations or other defects immediately and check the device
to determine the cause.
-
Switching the tool on/off by pulling/releasing the trigger.
-
Electronic soft start ensures a smooth achievement of the maximum speed without
without a sudden blow when turning on the tool.
-
Switch lock for continuous use.
-
Pull trigger C.
-
Press button B with your thumb.
-
Unlock the switch by pulling the trigger C again and then releasing it
-
Speed control with wheel A can set the maximum speed from low to high (MIN-6).
-
Start with wheel A in position MIN (low speed).
-
Bei need to choose a higher speed while the tool is running.
-
The optimal working speed depends on the material and can be determined by practical tests.
-
Operation of the tool
! First turn on the device, then place the device completely on the surface to be
polished.
Put on the polishing surface and move evenly in sections.
! After switching off, the tool should be lifted off the workpiece.
! The accessory continues to rotate for a short time after switching off the tool.
Holding and guiding the tool
-
! Always hold the tool on the softgrip surfaces while working.
-
Always hold the tool with both hands so that you have full control over the tool at all times
-
Ensure a safe stand.
! Do not put so much pressure on the tool to bring it to a standstill
-
Keep ventilation slots I free.
Werbung
Inhaltsverzeichnis
