Electrical Safety; Personal Safety - TECMIX TMX EPO 720 Originalbetriebsanleitung

2. ELECTRICAL SAFETY

- The plug of the power tool must fit into the socket. Never change the plug in any way.
Do not use adapter plugs with grounded power tools, but unchanged plugs and suitable
sockets. Modified plugs and suitable sockets reduce the risk of electric shock.
- Avoid body contact with grounded surfaces such as pipes, radiators, stoves and refrigerators,
stoves and refrigerators. There is an increased risk of electric shock if your body is grounded.
- Do not expose power tools to rain or moisture, because the ingress of water into a power tool
water increases the risk of electric shock.
- Do not misuse the cable. Never use the cable to carry, pull or unplug the power tool. Keep the
cable away from heat, oil, sharp edges, or moving parts. Damaged or tangled cables increase
the risk of electric shock.
- If you are running a power tool outdoors, use an extension cable suitable for outdoor use.
Using an outdoor-ready cable reduces the risk of electric shock.
- If the operation of a power tool in a humid environment is unavoidable, use a residual current
circuit breaker. The use of a residual current circuit breaker reduces the risk of electric shock.

3. PERSONAL SAFETY

- Stay alert, watch what you do, and use your common sense when using a power tool. Do not
use a power tool if you are tired or under the influence of drugs, alcohol or medications.
A moment of inacceptibility in the operation of power tools can lead to serious injuries.
- Use personal protective equipment. Always wear goggles. Protective agents, protective
equipment such as dust masks, non-slip safety barriers, safety helmets or hearing protection
used under suitable conditions reduce personal injury.
- Avoid unintentional starting. Make sure the switch is in the off position before connecting,
holding, or carrying the tool to the power source and/or battery.
- Remove any adjustment wrenches or wrenches before turning on the power tool.
- A wrench or key that remains on a rotating part of the electric tool can cause injury.
- Don't go too far. Always pay attention to a secure stand and balance.
This allows better control of the power tool in unexpected situations.
- Dress properly. Do not wear wide clothing and jewelry. Keep your hair, clothes and gloves
away from moving parts. Loose clothing, smug or long hair can get caught in moving parts.
- If there are devices for connecting dust extraction and collection devices, make sure they are
connected and used properly. The use of dust extraction systems can reduce dust-related
hazards.
4. USE AND CARE OF THE MOTOR DEVICE
- Do not use the power tool by force. Use the right power tool for your application. The right
power tool does the job better and safer at the speed it was designed for.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be operated with the switch is dangerous and needs to be repaired.
- Disconnect the plug from the power source and/or the battery from the power tool before
making any adjustments, changing accessories or storing power tools.