Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GENERAL
-
Use this tool only for dry polishing.
-
Use only the flanges that come with this tool.
-
This device should not be used by anyone under the age of 16.
-
Always unplug the power outlet before making any adjustments or replacing an accessory.
-
Do not process materials containing asbestos. (Asbestos is considered carcinogenic)
ACCESSORIES
-
Use only accessories with a permissible speed that is at least equal to the maximum idle
speed of the tool.
-
Never use accessories with a "blind" threaded hole smaller than M14 x 21 mm.
-
Do not use damaged, deformed or vibrating accessories.
OUTDOOR USE
-
When used outdoors, the device must have a residual current circuit breaker (FI) with a
maximum tripping current of 30 mA and use only an extension cable intended for outdoor use
and equipped with a splash-proof coupling socket.
BEFORE USE
-
Always check if the supply voltage matches the voltage indicated on the type plate of the
device.
Type plate of the device is indicated (devices with a nominal voltage of 230 V or 240 V can
also be connected to 220V).
-
Dust from materials such as lead-containing paints, some types of wood, minerals
and metal can be harmful (contact with the dust or inhalation of the dust can cause allergies
allergic reactions and/or respiratory diseases in the operator or bystanders) Wear a dust mask
and work with a dust extractor if it can be connected.
-
Certain dusts are classified as carcinogenic (e.B. oak and beech dust)
Especially in connection with additives for wood processing; at work, a
Dust mask wears and works with a dust extractor if it can be connected.
-
Observe the national dust regulations for the materials you want to work with.
-
Secure the workpiece (a workpiece clamped with clamping devices or in the vice is held more
securely than by hand).
-
Do not clamp the tool in a vice.
-
Use fully rolled out and secure extension cables with a capacity of 10 amps.
Werbung
Inhaltsverzeichnis
