Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
These preventive safety measures reduce the risk of using the power tool
accidentally started.
-
Keep unused power tools out of the reach of children and do not allow people unfamiliar with
the power tool or this manual to operate the power tool. Power tools are dangerous in the
hands of untrained users.
-
Maintain power tools. Check if moving parts are misaligned or jammed, breakage of parts and
any other conditions that may affect the operation of the electric tool. Have the power tool
repaired in case of damage before use. Many accidents are caused by poorly maintained
power tools.
-
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
reduce the risk of entrapment and are easier to control.
-
Use the power tool, accessories and bits etc. in accordance with
these instructions, taking into account the working conditions and the work to be carried out.
The use of the power tool for work other than those envisaged can lead to a dangerous
situation.
5. MAINTENANCE
-
Have your power tool serviced by a qualified professional who only has identical
Use spare parts. This ensures that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR POLISHING MACHINES
1) SAFETY INSTRUCTIONS FOR ALL WORK
a)
This power tool is intended for use as a polishing machine. Read all safety instructions,
instructions, illustrations and specifications that accompany this power tool. Failure to follow all
the instructions below may result in electric shock, fire and/or serious injury.
b)
This power tool is not recommended for grinding, sanding, wire brushing or cutting. Work for
which the power tool is not designed can pose a hazard and cause injury.
c)
Do not allow loose parts of the polishing hood or its fastening ropes to rotate freely. Hide or
shorten all loose fastening threads. Loose and rotating threads can pinch your fingers or get
caught on the workpiece.
d)
Do not use accessories that are not specifically designed and recommended by the
manufacturer of the tool. Just because the accessories can be connected to your electric
vehicle does not guarantee safe operation.
e)
The rated speed of the accessory shall be at least equal to the maximum speed indicated on
the power tool. Accessories that run faster than their rated speed can fly apart.
f)
The outer diameter and thickness of the accessories must correspond to the rated power of
your power tool. Incorrectly dimensioned accessories cannot be
are not sufficiently protected or controlled.
g)
The mandrel size of wheels, flanges, support plates or other accessories shall:
fit on the spindle of the power tool. Accessories with holes that do not
do not fit the fasteners of the power tool, run out of balance, vibrate. Vibrations and can lead to
loss of control.
h)
Do not use damaged accessories. Before each use, check accessories such as .B grinding
wheels for chips and cracks, support plates for cracks, tear or excessive wear, wire brushes
for loose or cracked wires. If the power tool or accessories have fallen off, inspect it for
damage or insert an undamaged accessory part. After inspection and installation, keep
Werbung
Inhaltsverzeichnis
