The fall arrester system, is a guided type fall arrester on a flexible anchorage line made of a Kernmantle rope of diameter
12mm. It accompanies the user without requiring manual adjustment during upward or downward movement, and locks
automatically on the anchorage line when a fall occurs. Follow Step 1 to Step 4 to use the fall arrester:
1. Connect the upper end of the anchorage line with the help of the connector to the anchorage point. Ensure that the
anchor device is strong enough & has a minimum strength of 12kN for metal & 18kN for textile.
2. Now connect the connector of the rope grab to the attachment element of your Full Body Harness. Fall arrest
attachment points are marked with the letter "A", they can be D-ring or 2 loops (in this case both marked A/2).
Ensure that the connector is locked tight.
A
A
We recommend the user to use preferably the front anchorage point of the harness.
3: The user is now free to move up and down while pressing the rope grab grip.
4: Ensure that when you are working, the rope grab grip is released to its normal position.
The anchorage line must be hanging vertically from a reliable anchorage point.
5