Braun Truescan Plus BPW4300 Handbuch Seite 8

4. Put the hand with the appliance on the other upper arm as
5. If your wrist position is accurate the the green arm icon on
BEEP BEEP BEEP BEEP
If the measuring position is incorrect, the measurement can't
start, so there is no possibility to obtain a wrong or inaccurate
measurement.
The device will beep rapidly if the positioning system is incor-
rect. You have to move your arm up or down according to the
arrow indication on the LCD screen.
If your wrist position is at the correct level with your heart, the
LCD will display and the measurement will start.
BEEP BEEP BEEP BEEP
IMeasuring arm: If your wrist position is lower than your heart,
the LCD will display as shown and will beep as "BEEP BEEP BEEP
BEEP".
If your wrist position is higher than your heart, the LCD will
display as shown and will beep as " BEEP BEEP BEEP BEEP".
If the positioning system has been deactivated, you will have no
indication before processing the measurement.
shown. Slowly move the hand upward along the upper arm.
Watch the positioning system (A) and move your hand up or
down according to the direction of the arrow shown.
the device will appear with a black outline and the device will
sound "BEEP BEEP BEEP BEEP". Directly following the the four
beeps the device will automatically infl ate and begin taking
the user's reading. When the measurement is complete, the
reading is displayed on the LCD and at the same time, buzzer
will sound a long beep to remind user measurement is com-
pleted.
TOP: SYSTOLIC VALUE
MIDDLE: DIASTOLIC VALUE
BOTTOM: PULSE
8