P
ULL ON THE PROTECTIVE COVER
C
ARE
11.0 Pulling on the protective cover
The sunshade and canopy material should be
protected against soiling and damage by pulling
on the protective cover when not in use.
• When doing this use a stepladder and get help
from a second person.
Caution: Danger of accident!
• Only set the stepladder up on firm foundations.
Get a second person to hold the stepladder
two prevent accidents.
➭ Pull the protective cover over the sunshade
from the top.
➭ Close the protective cover by looping the
closing tape around the sunshade and
knotting it.
12.0 Care of your
Note
• Do not use any sharp-edged tools such as knives or metal scrapers,
or any aggressive cleaners or solvents, to clean your sunshade.
• Do not use large quantities of water when cleaning, in other words
do not use hosepipes or high-pressure cleaners.
12.1 Cleaning the canopy material
The canopy material can be cleaned of dust and
light soiling using a brush or a damp cloth.
If heavy soiling is present the canopy must be
removed from the sunshade frame and cleaned.
You can find information about cleaning the
canopy material on the label sewed onto the
canopy.
12.2 Removing sunshade cover
Tools required:
❏ Phillips screwdriver No. 2
Stages:
➭ Open the sunshade about half-way.
➭ Release all material velcro bands on the
sunshade frame from the inside.
Page 20
Easy Sun
Easy Sun
Easy Sun
Easy Sun
Easy Sun
PARASOL SUNSHADE
Protective
cover
Closing tape
Sunshade frame
Velcro band
Issue: 09.2002