F
ITTINGS
M
ECHANICAL COMPONENTS
4.0 Fittings: Mechanical components
4.1 General
Material such as plastic, plastic coated
aluminium and non-rusting steel have been used
for all mechanical components of the sunshade.
This enables the sunshade to have a very high
degree of weather resistance, functionality and
service life.
4.2 Nameplate
The nameplate is attached to the stand tube in the
vicinity of the lower slider tube stop.
The following information is printed on the nameplate:
• Sunshade model
• Manufacturer
• Manufacturer's address
• Manufacturer's Internet address
Sticker with Fabrication No.
4.3 Canopy material
The canopy material is manufactured in Poly-
ester fabric or Dralon depending on the version.
Both fabric types are treated to be water-
repellent.
Coloured canopies are tested for light
and colour fastness (DIN 54 004).
The canopy material can be removed from
the sunshade easily for cleaning. Please observe
the information in the chapter entitled "Care".
Note
The sunshade canopy material is treated to be water-repellent. This
treatment is however not intended to prevent water penetration in
heavy rainfall.
The
Page 6
Easy Sun
PARASOL is not an umbrella.
Issue: 09.2002