Hood Installation - GLOBALO Quadro Isola 40 Gebrauchs- Und Montageanleitung

EN

HOOD INSTALLATION

1. Unscrew the top tube from the frame
x4
2. Drill four holes above the hob and place four pegs and two screws in them diagonally - just
like the beans in the rack. Tighten the screws leaving 5mm clearance between the screw head
and the ceiling. Place the frame with the beans on the screws and twist so that the heads of
the screws move to the narrower part of the beans - this will suspend the frame and you can
proceed to screw in another two screws. Finally, tighten all four screws.
30
x4
x4
x2
CAUTION!
IN THE CASE OF SUSPENDED CEILINGS, A
REINFORCED STRUCTURE/FRAME MUST BE
PREPARED IN ADVANCE. IT IS NOT POSSIBLE TO
FIT THE HOOD TO A LIGHTWEIGHT SUSPENDED
CEILING STRUCTURE AS THERE IS A RISK OF IT
BREAKING AND FALLING.
Fig. 7
x2
Fig. 8