Sygonix WLAN Zigbee 4 Bedienungsanleitung Seite 42

Once the gateway has been connected, put it into the flush-
mounted/surface-mounted box.
When doing so, ensure the "UP" arrow points upwards.
Fix the gateway in the box. It is best to use the original
screws for the box. If there are none, use the two screws
included in the delivery.
Finally, mount the display back onto the gateway.
Ensure the display connector can be easily inserted into the
gateway socket.
Press the edge of the display until it snaps into place on the
gateway.
Now switch on the mains voltage by inserting the fuse that
was removed before installation or by switching on the circuit
breaker.
42