Connection And Installation - Sygonix WLAN Zigbee 4 Bedienungsanleitung

9.2 Connection and installation

Refer to the "Preparations for installation" sec-
tion.
When the gateway is installed in a flush-mounted box, it
should have a minimum depth of 50 mm.
Before you proceed with the installa-
tion, disconnect the display from the
gateway.
Using a flat-blade screwdriver or
similar tool, carefully drive it into the
slot (see arrow in the picture) on the
underside of the display (where the
speaker is located) and lever the dis-
play off the gateway.
40