Connection/Mains Voltage - Sygonix WLAN Zigbee 4 Bedienungsanleitung

7.5 Connection/mains voltage

Never attempt to modify the electrical compo-
nents of the product. Risk of death by electric
shock!
Product installation must be carried out in a deener-
gised state. Turn off the mains supply by switching off
the respective circuit breaker or by unscrewing the
fuse. Protect it against an unauthorised switch-on,
e.g. with a danger sign.
Furthermore, turn off the earth leakage circuit breaker
to disconnect all the poles from the mains voltage.
Check the mains connection for absence of voltage
using a suitable tester.
The product must only be used when it is mounted in
a fixed location. Install the product, for example, in a
suitable flush or wall mounted contact box.
Ensure that the insulation of the housing is neither
damaged nor destroyed.
Never touch the product with wet or damp hands!
There is a risk of fatal electric shock!
36
Discontinue use of the device if any elec-
trical components are damaged.
Do not modify the electrical components.