Operation Mechanism - Panasonic S-71WF3E Bedienungsanleitung

Maintenance

Operation Mechanism

■ Heating performance
• This air conditioner utilizes outside air for heating; its heating performance reduces as
outside temperature decreases.
- In the event that heating is not suffi cient, please use an additional heating appliance.
■ Defrosting
• This appliance may start defrosting operation to melt frost formed in the outdoor unit.
1. Defrosting starts: The indoor unit fan stops (or the speed becomes extremely slow).
- " " (STANDBY) appears.
2. Heating operation resumes after several minutes: The indoor unit fan remains
stopped (or it will run at a very slow speed) until the indoor heat exchanger coil warms up
suffi ciently.
- " " (STANDBY) appears.
3. Defrosting is complete: The indoor unit fan starts operation.
- " " (STANDBY) disappears.
■ "DRY" operation
• Once the room temperature reaches the level that was set, the outdoor unit repeats the
cycle of turning on and off automatically.
• When the room temperature is more likely to reach the level that was set, the fan speed is
set to "breeze" (light wind) automatically.
■ Should power failure occur while the unit is running
• The unit will resume operation automatically. Operation settings prior to power failure will be
used.
NOTICE:
This air conditioner incorporates a device that generates a biocidal product.
Free radicals generated by a device incorporated in the air conditioner have the capacity to inhibit
pollutants, such as certain types of bacteria, viruses, mould.
Active substances : Free radicals generated in situ from ambient air or water.
Usage : This device function can be operated ON / OFF by "nanoe X" icon button.
Scan the matrix two-dimensional (2D) barcode and refer to the manual on "How to Use" for details.
https://eu.datanavi.ac.smartcloud.panasonic.com/documents/
16