Set Clock - RainPoint ITV101P Benutzerhandbuch

PROGRAMMING YOUR TIMER
EN
STEP 1:
1) Turn dial to SET CLOCK.
2) Hold the "OK" button to switch time display of 12H or 24H mode.
12H mode: with "AM" and "PM"
24H mode: without "AM" and "PM"
3) " " flash: Using the "+" button to set the day of a week and press "OK" to confirm.
4) " 00: " flash: Using the "+" button to set hour and press "OK" to confirm.
5) " :00 " flash: Using the "+" button to set minute and turn dial to save changes.
Tips:
Hold the "+" button can increase the time quickly.
At the end of setting, please turn dial to save changes. If you press "OK" at the
end, it will go back to the first setting.

SET CLOCK

- 8 -