TROUBLESHOOTING
EN
PROBLEM
The water inlet leakage 1. No filter or not be placed
Condensation on the
screen
Short battery life
Low water pressure
If your Rainpoint product does not operate properly after trying the troubleshooting
steps, please contact us by phone or email : 1-833-3815659 | service@rainpointus.com
Possible Cause
horizontally
2. The faucet is not the
standard 3/4"
1. Air condenses inside the
screen due to the
difference in temperature
between inside and
outside
1. Mixed use of old and new
batteries
2. Used the carbon batteries
or rechargeable batterie
1. Filter blockage
2. Inlet pressure is not
sufficient to support
watering needs.
- 16 -
Possible Solution
1. Add filter and make sure
it's placed horizontally in
the inlet.
2. Make sure the faucet is a
3/4" faucet.
3. Strengthen it with raw
rubber wrap.
1. The fog will disappear as
the temperature rises, or
leave it stand for a period
of time.
1. Use new alkaline batteries.
2. Rechargeable batteries
and carbon batteries have
a short life, use the
alkaline batteries instead
of them.
1. Check if the filter is
clogged, if so, clean or
replace the filter.
2. Make sure the timer is
installed properly and not
cross-threaded.
3. Install a booster pump or
other booster pressurizing
equipment.