RainPoint ITV101P Benutzerhandbuch Seite 13

STEP 6:
1) Turn the dial to ON.
(All watering plans being set will run automatically)
2) During watering:
a. Display the remaining watering time and
b. Press the "+" button, and then the current day and time will be displayed.
3) When not watering:
a. If there is no watering plans being set, it will only display the current day and time.
b. If there are plans being set but not running yet, it will display the current day
and time, and followed by how much time is left to the next watering plan.
Note:
There is no watering plans being set, which means the start time or watering
duration of all 3 watering plans are truned off.
To turn off a certain plan, please turn off the start time or watering duration of that plan.
(About how to turn off the start time or watering duration, please refer to the section
[STEP 2: START TIME] and [STEP 3: HOW LONG] of Chapter [PROGRAMMING
YOUR TIMER])
AUTO WATERING
will flash.
- 13 -
EN