Technical Data - Hilti NURON TE DRS-4/6 Original Bedienungsanleitung

3 Description
3.1 Product overview
3.2 Intended use
The TE DRS­4/6 dust removal module dust removal module is an accessory for the Hilti TE 4­22 (03) and
TE 6­22 (05) rotary hammer drills. It collects a high percentage of the dust and it attaches quickly and easily
to the rotary hammer drill. The dust removal module has a built-in extractor fan. This fan is driven by its own
motor. When the rotary hammer drill is switched on the dust removal module draws its electric power from
the rotary hammer drill's battery.
The dust removal module is not suitable for working on metal and wood.
3.3 Items supplied
TE DRS-4/6 dust removal module, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4

Technical data

Voltage
Suction
Weight
With TE6-22
With TE4-22
5 Operation
5.1 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
*2290878*
1
21.6 V
250 ℓ/min
1.05 kg
TE-CX XX/17 80 mm
TE-CX XX/15 60 mm
TE-CX X" x 6" 80 mm
TE-CX XX/22 110 mm
TE-CX XX/17 57 mm
TE-CX X" x 8" 110 mm
2290878
Extraction head
@
Stroke preset button
;
DRS electrical interface
=
Installation opening for accessories
%
DRS release button
&
Dust container release
(
Cleaning mechanism (optional)
)
Depth gauge
+
English 13