User manual / Bedienungsanleitung
4. Operating information
•
As long as a load is connected to the
for operation of the connected device there will be no charging.
•
A reduction of the output voltage of up to 4V between two charging cycles is normal.
Crucial for the correct speed of the turntable is a noise free current and not the absolute value.
This is ensured by battery-buffering and a special, linear regulation in the turntable.
Switching off
•
the unit is done using the power switch on the rear side of the
•
By turning the knob on the back, the light of the LED ring on the front can be dimmed in all
operating modes (see Pic.1, red mark).
Pic. 1:
Rear view
Please note:
To prevent overheating of electronic parts never cover or put anything on top of the
smart power 12V
.
Do not dispose the unit in the domestic waste.
smart power 12V
Do not expose the
6
smart power 12V and the remaining charge level is sufficient
to a temperature above 40° Celsius.
Clearaudio electronic GmbH
Spardorferstraße 150
91054 Erlangen
Germany
Phone: + 49 9131 40300100
Fax: + 49 9131 40300119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
smart power 12V
© clearaudio
electronic GmbH, 2021-03
.