Mounting The Clarify Tonearm - clearaudio electronic Clarify Bedienungsanleitung

User manual / Bedienungsanleitung
3. Mounting the
Pic. 4: Assembling the arm base
Pic. 5: Mounting the tonearm
Pic. 6: Locking the tonearm
Made in Germany
Clarify
tonearm
Take the clamping ring and place it on the
recess in the tonearm base.
Now you can attach the clamping ring to the
tonearm base with the 3 supplied M4 x 10
screws.
Make sure that the side hole of the clamping
ring remains accessible (see Pic. 4).
First insert the tonearm cable and then the
Clarify
tonearm foot of the
hole of the clamping ring (Pic. 5).
Now fix the tonearm with the screws and
the hex wrench. Do not over-tighten for later
adjustments (Pic. 6)!
tonearm into the
Page / Seite 9