Troubleshooting - clearaudio electronic Clarify Bedienungsanleitung

User manual / Bedienungsanleitung

6. Troubleshooting

First check the possible causes to rule out incorrect operation if you have a problem with your
tonearm.
Please contact your dealer if the error persists!
Never try to open the unit and/or repair it yourself, this will void the warranty!
Error
Is the record or the stylus dirty or
damaged?
Needle bounces
Has the tracking force been set
or slides across
too high?
record
Is the record deformed or
scratched?
Is the turntable leveled?
Tonearm lift
The tonearm has not been used
does not lower
for a long time, which means that
or lowers very
the greas in the tonearm lift can
slowly
harden and lower with difficulty.
Made in Germany
Cause
Clean the record / or the cartridge. Clearaudio
offers many helpful accessories for care and
cleaning. In the event of damage, we recommend
an assessment by a specialist and, if necessary,
an exchange.
Adjust the tracking force.
Use only a suitable gauge! For example
Clearaudio „Weight Watcher touch" or
„Smart Stylus Gauge".
Use a record clamp or replace the record.
Check the alignment of the turntable and adjust
if necessary.
Operate the lift about 4-5 times to loosen the
grease in the tonearm lift and the lift bar will lower
evenly again.
Measure
Page / Seite 15
Clarify