User manual / Bedienungsanleitung
3. Mounting the
Pic. 8: Mounting the clamping ring
Pic. 9: Mounting the tonearm
Page / Seite 10
Tracer
tonearm without VTA-Lifter
Take the clamping ring and place it on the recess
in the tonearm base.
Now you can attach the clamping ring to the
tonearm base with the 3 supplied M4 x 10
screws.
Make sure that the side hole of the clamping
ring remains accessible (see Pic. 9).
First insert the tonearm cable and then the
Tracer
tonearm foot of the
of the clamping ring.
Now fix the tonearm with the screws and
the hex wrench. Do not over-tighten for later
adjustments!
Tracer
To assemble the
please follow the separate user manual for the
VTA-Lifter.
© clearaudio electronic GmbH, 2022-11
tonearm into the hole
tonearm with VTA-Lifter,