Adjustment Of The Anti-Skating - clearaudio electronic Clarify Bedienungsanleitung

User manual / Bedienungsanleitung

5.5 Adjustment of the anti-skating

Pic. 15: Adjustment of the Antiskating
Pic. 16: Marking anti-skating screw
You can change the anti-skating as follows:
Turn clockwise (max. 5 turns)
Turn counterclockwise (max. 5 turns)
We recommend the Clearaudio Trackablity Test Record available from www.analogshop.de or from
your specialist retailer for a professional and perfect anti-skating setting.
We recommend to re-check all settings again and correct them if necessary before connecting the
tonearm to your phono pre-amplifier.
We hope you enjoy your new
Your Clearaudio team
Page / Seite 14
The anti-skating is already preset by Clearaudio.
Use the adjusting screw on the underside of the tonearm
to adjust the anti-skating.
This setting is marked with a line on your tonearm (viewed
from below).
The tonearm adjustment is now complete.
Clarify
tonearm.
= stronger anti-skating
= less anti-skating
© clearaudio electronic GmbH, 2022-11