Assembling And Preparing; Safety Instructions; Accessories - LG AM-ST21BD Benutzerhandbuch

2
* Image shown may differ from your product.

Safety instructions

This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
Please read these safety precautions carefully before using the product.
• When lifting or moving the product, at least two people are
required due to the heavy weight of the product.
- The product may fall down, causing a malfunction or
injury.
• Do not let children hang on or climb onto the product.
- The product may fall down, causing an injury or even
death.
• Do not install the product in an area which is unstable,
vibrating or where the product is not completely supported
(e.g. a shaky or tilted shelf).
- The product may fall down or overturn, causing an injury
or malfunction.
• Put the product on a flat and firm floor.
- The product may fall and cause an injury.
• When moving or handling a product assembled with the
Stand, be cautious about damaging the exterior of the
product.
• When there is a stain or fingerprint left on the surface, wipe
it off gently.
- When removing a stain, do not use excessive force. Wiping
with excessive force may cause scratches or discoloration
on the product.

Assembling and Preparing

Accessories

a
x 4
(M4 x L20)
How to Assemble the Stand
• When assembling the stand, put the product on a table or a
flat floor with its screen facing downwards. Before this place
a soft, fluffy cloth on the surface then put the product on top
to prevent the screen from being damaged.
• When assembling the stand, check if the screws are
completely fastened. (If they are not completely fastened,
the product may lean forward after being installed.) Avoid
fastening the screws with excessive force because otherwise
the joint part of the screws may be worn out, and the screws
might come off.
• When assembling the product, do not use foreign substances
(oil, lubricant, etc.) on the screws.
- It may cause damage to the product.
• Before installing a wall mount support, disassemble the
Stand by conducting the method to assemble the stand in a
reverse order.
b
x 4
(M5 x L30)