struers Labotom-3 Handbuch Seite 3

Labotom-3
Instruction Manual
Labotom-3
Safety Precaution Sheet
To be read carefully
before use
The operator(s) should be fully instructed in the use of the machine and
1.
its cut-off wheels according to the Instruction Manual and the
instructions for the cut-off wheels.
The machine must be placed on a safe and stable support table. All the
2.
machines safety functions and guards must be in working order.
Use only intact cut-off wheels. The cut-off wheels must be approved for
3.
min. 50 m/s.
Observe the current safety regulations for handling, mixing, filling,
4.
emptying and disposal of the additive for cooling fluid.
The workpiece must be securely fixed in the quick-clamping device or
5.
the like. Large or sharp workpieces must be handled in a safe way.
Protruding workpieces should be shielded or marked.
6.
The cutting handle should be lowered slowly and carefully, in order to
7.
avoid breaking the cut-off wheel.
Struers recommends the use of an exhaust system as the materials to
8.
be cut may emit harmful gasses or dust.
Do not open the protection guard before the cut-off wheel has stopped
9.
completely.
10. Do not put your hands through the rubber curtain during operation of
the machine.
The equipment should only be used for its intended purpose and as detailed in the Instruction Manual.
The equipment is designed for use with consumables supplied by Struers. If subjected to misuse, improper
installation, alteration, neglect, accident or improper repair, Struers will accept no responsibility for
damage(s) to the user or the equipment.
Dismantling of any part of the equipment, during service or repair, should always be performed by a qualified
technician (electromechanical, electronic, mechanical, pneumatic, etc.).