Controls - struers Labotom-3 Handbuch

Controls

Name Key

MAIN
SWITCH


START


STOP
10
Labotom-3
Instruction Manual
Function
The main switch is located on
the right hand side of Labotom-3.
Turn clockwise to switch on the
power.
The main switch also serves as
an emergency stop.
Starts the machine. The cut-off
wheel starts rotating and the
cooling water is turned on.
Cannot be activated with the
protection guard open or
overload of the cutting motor.
Stops the machine. The cut-off
wheel stops rotating and the
cooling water is turned off.
Stops the flushing, when
activated.
Name Key


FLUSH

Function
Starts the pump for flushing.
The flush nozzle is located in the
rear of the cutting chamber, to
the right.
The flushing hose can be pulled
out and pushed back.
Press nozzle to flush.