Bosch GSS 14 Originalbetriebsanleitung Seite 9

Operating Instructions
Sanding
The removal rate is determined mainly by the sand-
ing sheet selected and the controlled contact pres-
sure of the sanding plate.
Move the orbital sander parallel and in circular spots
or alternately in lengthways and crossways direc-
tions. Do not apply excessive pressure to the orbital
sander!
An excessive increase in the application pressure
produces no increase in the sanding performance
and causes heavy wear to the machine and the
sanding tool.
Take care to apply uniform application pressure.
This increases the service life of the sanding
sheet.
Only flawless sanding sheet produce good sand-
ing results and protect the machine. Clogged
sanding sheet produce poor sanding results.
Do not sand wood and metal with the same sand-
ing sheet.
Use only original Bosch sanding sheets and ac-
cessories.
Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
Always keep the machine and the ventilation slots
clean.
If the machine should happen to fail despite the
care taken in manufacture and testing, repair
should be carried out by an authorised customer
services agent for Bosch power tools.
For all correspondence and spare parts orders,
always include the 10 digit order number from the
nameplate of the machine!
Guarantee
We guarantee Bosch equipment in accordance
with statutory/country-specific regulations (proof
of purchase by invoice or delivery note).
Damage attributable to normal wear and tear,
overload or improper handling is excluded from
the guarantee.
Claims can be recognised only when the machine
is sent, undismantled, to the dealer or a Bosch
customer service centre for electric tools.
Environmental Protection
These instructions are printed on recycled paper
manufactured without chlorine. The plastic com-
ponents are labelled for categorized recycling.
Service
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Fax
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Fax
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 50 144, HD 400
according to the provisions of the regulations
89/336/EWG, 98/37/EG.
Dr. Gerhard Felten
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packag-
ing should be sorted for environ-
ment-friendly recycling.
Service
...........................................
Advice line
....................................
...........................................................
Service
...................................................
...................................................................
Declaration of Conformity
(0 18 95) 83 87 82
(0 18 95) 83 87 91
(0 18 95) 83 87 89
(01) 45 15 211
(01) 45 17 127
Dr. Eckerhard Strötgen
11