Installing Your New Appliance - Hisense FV298N4AWE Bedienungsanleitung

7

Installing your new appliance

Before using the appliance for the first time,
you should be informed of the following tips.
Warning!
For proper installation, this freezer must be
placed on a level surface of hard material
that is the same height as the rest of the
flooring. This surface should be strong
enough to support a fully loaded freezer.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving the freezer sideways
may damage your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the freezer.
Suggest: It is advisable for there to be
50-75mm of space from the back to the
wall, at least 100mm from its top, at least
100mm from its side to the wall and a
clear space in front to allow the doors to
open 130°. As shown in follow diagrams.
is necessary to Note:

This appliance performs well within the
climate class from SN to T showed in the
table below. It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
Climate class Ambient temperature
SN
N
ST
T

Stand your appliance in a dry place to
avoid high moisture.
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C