Installing Your New Appliance - Hisense RQ689N4AF2 Benutzer-Bedienungsanleitung

Installing your new appliance

Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiency
of the cooling system and save
energy, it is necessary to maintain
good ventilation around the appliance
for the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
Suggest :It is advisable for there to be
50~70mm of space from the back
to the wall, at least 100mm from its
top,at least 100mm from its side to the
wall and a clear space in front to allow
the doors to open 135°.As shown in
following diagrams
100
100
908mm
1410mm
Note:
This appliance performs well within
the climate class showed in the table
below. It may not work properlyif being
left at a temperature above or below
the indicated range for a long period.
Climate class Ambient temperature
SN
N
ST
T
●
Stand your appliance in a dry place to
avoid high moisture.
● Keep the appliance out of direct
sunlight， rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
Leveling of appliance
For sufficient
●
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted.
● To allow the doors to self-close, tilt
the top backwards by about 10mm.
●
You can adjust them manually by
hand or by using a suitable spanner.
8
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
leveling and air
≤10mm