Safety Information; Technical Data; Before Commissioning - Scheppach TW1200 Original Bedienungsanleitung

Only use the trolley as described in this operating man-
ual. Any other use is considered unintended use and
can lead to damage or even injury. The trolley is not
a toy.
The manufacturer or dealer assumes no liability for
damage caused by unintended or improper use.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.

5. Safety information

Risk of injury!
Improper use of the trolley increases the risk of injury.
• Always check the trolley before use. Do not use the
trolley if it is damaged.
• Only move the trolley by pushing it to another loca-
tion. To avoid injury, do not pull the trolley
• Always ensure the workshop trolley is secure when
setting it up.
• Do not climb or stand on the trolley.
• Close and lock all of the drawers before pushing
the trolley. Otherwise, the drawers could open while
pushing so that the trolley becomes unstable.
• Stow the toolbox in the tool trolley before pushing
or transporting it. The toolbox can fall down due to
vibration or tilted position during pushing.
• Do not overload the drawers of the trolley.
• Keep the trolley away from children. Do not leave the
trolley unattended in the vicinity of children.
• Keep children away whilst assembling the trolley.
This product includes screws and other small parts.
These could cause asphyxiation if they are swal-
lowed or inhaled.
• The trolley is very heavy when fully loaded. There is
a risk of tipping in the event of improper opening. Do
not open multiple drawers at the same time.
• Do not assemble the trolley on a moveable object to
avoid tipping.
• Warning: Only position and operate on a solid, lev-
el surface. The trolley can become unstable and tip
over if it is kept or pushed on a sloping surface.
• Always block the rotatable castors after the trolley
has been pushed to the desired location to prevent
the trolley from rolling away.
• Do not make any changes to the trolley. For exam-
ple, do not weld any external bars and do not attach
any electrical devices to the trolley.
14 | GB
• Do not attach or mount the trolley to a vehicle. Do
not pull the trolley with a vehicle.
• Only use original spare parts and accessories.
Observe all safety instructions. If you disregard the
safety instructions, you endanger yourself and others.

6. Technical data

Total
Workshop trolley
Toolbox
Tool trolley drawer
Payload
Toolbox drawer
Payload
Weight of workshop trolley
without tools
Weight of toolbox without
tools
Total weight with tools
Max. payload
Technical changes reserved!
7.

Before commissioning

Check the tool trolley for transport damage. Immedi-
ately report any damage to the transport company that
delivered the tool trolley.
• Open the packaging and carefully remove the tool
trolley.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the workshop trolley and accessory parts for
transport damage.
• If possible, keep the packaging until the expiry of the
warranty period.
m ATTENTION!
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!
www.scheppach.com
525 x 280 x 1045 mm
525 x 280 x 630 mm
450 x 240 x 325 mm
460 x 250 x 75 mm
5 kg
380 x 205 x 45 mm
12 kg
11.7 kg
7.2 kg
28.5 kg
35 kg