Introduction; Device Description; Scope Of Delivery; Proper Use - Scheppach TW1200 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description

1. Toolbox
2. Slip mat
3. Workshop trolley
4. Door knob
5. Castor with brake
6. Castor
7. Tool trolley locking bar
8. Intermediate shelf
9. Small parts compartment
10. Toolbox locking bar

3. Scope of delivery

• Workshop trolley (3)
• Toolbox (1)
• Slip mat (2)
• Door knob (4)
• Castor with brake (5)
• Castors (6)
• Tool trolley locking bar
• Intermediate shelf
• Small parts compartment
• Toolbox locking bar
• Open-ended spanner (A)
• Screws M6 (B)
• Washer M6 (C)
• Hexagonal nut M6 (D)
• Screw M4 (E)
• Metal protection brackets (F)
• Operating manual

4. Proper use

The trolley is designed solely for the storing of tools
with a maximum load of 35 kg. It is solely intended for
private use indoors and is not suitable for commercial
applications.
www.scheppach.com
1 x
1 x
1 x
1 x
1 x
3 x
1 x
1 x
1 x
1 x
1 x
6 x
6 x
4 x
1 x
2 x
1 x
GB | 13