Siemens Gigaset 108 Bedienungsanleitung Seite 12

Gigaset USB Adapter 108 / deutsch / A31008-M1031-R101-2-Z143 / qig_usbadapter108.fm /
10
Procedure for installation
To establish Internet access using Access Point, proceed as follows:
1. First install the Gigaset USB Adapter 108 in a PC.
2. Then install the Access Point. This is described in the operating instructions
for the device in question.
3. Then set up the connection from the Gigaset USB Adapter 108 to the Access
Point.
Installation of Gigaset USB Adapter 108 on a PC
Notes:
u
Do not insert the USB cable plug into a spare USB port on your PC until the
installation software prompts you to do so.
u
When installing the Gigaset USB Adapter 108 , the SSID (Service Set ID) of
all the wireless network components must be identical.
u
You may require administrator rights for the installation process on your
PC.
ì
Close all running programs.
ì
Insert the CD-ROM supplied into the CD-ROM drive of your PC and wait until
the welcome screen appears. If this screen does not appear automatically,
start installation manually:
– Open Windows Explorer.
– Select the CD-ROM drive.
– Double-click start.exe.
Gigaset USB Adapter 108