Cleaning And Maintenance Of The Dust Bag; Cleaning And Maintenance Of The Self-Cleaning Lter; Cleaning The Outside - SACH VAC3 Dynamic Bedienungsanweisung

VAC3- Central Vacuum System

8.3 CLEANING AND MAINTENANCE OF THE DUST BAG

(Optional - No included - REF. RVAC30055-SC)
1. Remove the central vacuum unit's dust container.
2. Disconnect the dust bag from its connector
3. Seal the dust bag's opening with the self-adhesive
tape to prevent dust from spilling out of the bag.
4. Fit a new dust bag by inserting it into the connector.
5. Re-connect the central vacuum's dust container.
8.4 CLEANING AND MAINTENANCE OF THE SELF-CLEANING
FILTER
(Optional - No included - REF. RVAC30056-SC)
1. Remove the central vacuum unit's dust
container.
2. Take out the self-cleaning lter
3. Shake the self-cleaning
remove all dust and dirt (washable).
4. Re- t the self-cleaning lter in its housing taking
care to ensure that it's reinstalled securely**.
5. Re- t the central vacuum dust container.
**Bend the self-cleaning lter to t it into the track
within the rim of the central vacuum unit.

8.5 CLEANING THE OUTSIDE

We recommend to clean periodically the outside of the central vacuum unit using a soft cloth
moistened in water and neutral soap, allowing it to dry completely before starting the system again. Do
not use solvents, alcohol or any chemical product when cleaning the outside.
.
*
lter thoroughly to
*Self-cleaning lter tab
Central vacuum track
27
User guide
Fit the lter into the track
Fit the lter into the
Bend the lter
track