Cleaning And Maintenance; Emptying The Dust Container; Cleaning And Maintenance Of The Lter Hepa + Pro-Tecta - SACH VAC3 Dynamic Bedienungsanweisung

VAC3 - Central Vacuum System

8. CLEANING AND MAINTENANCE

WARNING: DO NOT ATTEMPT THE MAINTENANCE OF YOUR CENTRAL VACUUM UNIT WITHOUT FIRST DIS-
CONNECTING IT FROM THE ELECTRICAL SUPPLY.
The e ectiveness of the central vacuum unit and its optimum performance is dependent on its correct use
and maintenance. It is recommended that cleaning and maintenance is undertaken on a regular basis to
prevent mechanical breakdowns.

8.1 EMPTYING THE DUST CONTAINER

8.2 CLEANING AND MAINTENANCE OF THE FILTER HEPA +
PRO-TECTA
1. Detach the container from the central vacuum unit.
2. Access the protective lter located inside and remove it by turning it
90 º anti-clockwise.
3. Remove both the cartridges together.
4.This protective lter is re-useable and can be washed using neutral
soap and water. Wait until it is completely dry before re tting it.
5.To access the Hepa
protective lter and wash in the same way. Don't forget to wait until the
lter is dry before re tting it.
6. Check that both lters are in perfect condition. Never re t damp or
damaged lters. Also, please note that to use the central vacuum unit
without lters would damage it.
7.Re-position the Hepa lter inside the Pro-Tecta lter and t both lters
together by turning the handle clockwise to lock the lters in place
8. Re- t the central vacuum dust container.
1. Detach the container by unfastening the clamps.
2. Remove the Cyclonic Filter.
3. Empty the dust container.
4. Ensure the Cyclonic Filter is repositioned correctly.
lter follow the same procedure as for the
26
User guide