Technical Data; Rating Plate - ZANKER KEV6340XXK Benutzerinformation

Problem
and a number come on.
comes on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes

9. TECHNICAL DATA

9.1 Rating plate

Model KEV6340XXK
Typ 60 HAD 54 AO
Ser.Nr. .................
ZANKER
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Right front
Right rear
For optimal cooking results use cookware no
larger than the diameter of the cooking zone.
12 ENGLISH
Possible cause
There is an error in the hob.
The second phase of the power
supply is missing.
on. Make sure, you operated the hob
correctly. If not the servicing by a service
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
PNC 949 492 143 01
220 - 240 V 50 - 60 Hz
Made in: Romania
6.5 kW
Nominal Power (Max heat set‐
ting) [W]
2300
1200
1200
1800
Remedy
Deactivate the hob and activate it
again after 30 seconds. If
comes on again, disconnect the hob
from the electrical supply. After 30
seconds, connect the hob again. If
the problem continues, speak to an
Authorised Service Centre.
Check if the hob is correctly con‐
nected to the electrical supply. Re‐
move the fuse, wait one minute, and
insert the fuse again.
Cooking zone diameter [mm]
210
145
145
180