Herunterladen Inhalt Inhalt Diese Seite drucken

Child Safety Device; The Heat Setting; Residual Heat Indicator; Hints And Tips - ZANKER KEV6340XXK Benutzerinformation

Vorschau ausblenden Andere Handbücher für KEV6340XXK:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

signal sounds and the hob deactivates.
Remove the object or clean the control
panel.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
1 - 2
3 - 4
5
6 - 9

5.3 The heat setting

Touch
to increase the heat setting. Touch
to decrease the heat setting. Touch
and
at the same time to deactivate the
cooking zone.

5.4 Residual heat indicator

WARNING!
As long as the indicator is on, there is
a risk of burns from residual heat.
The indicator
appears when a cooking
zone is hot.

6. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
6.1 Cookware
• The bottom of the cookware must be as
thick and flat as possible.
• Ensure pan bases are clean and dry
before placing on the hob surface.
• In order to avoid scratches, do not slide or
rub the pot across the ceramic glass.
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.

5.5 Child Safety Device

This function prevents an accidental
operation of the hob.
To start the function: activate the hob with
. Do not set any heat setting. Touch
the two front cooking zones at the same time
for 4 seconds.
comes on. Deactivate the
hob with
.
To stop the function: activate the hob with
. Do not set any heat setting. Touch
the two front cooking zones at the same time
for 4 seconds.
comes on. Deactivate the
hob with
.
To suspend the function for only one
cooking session: activate the hob with
comes on. Touch
cooking zones at the same time for 4
seconds. Set the heat setting in 10
seconds. You can operate the hob. When
you deactivate the hob with
operates again.
Cookware made of enamelled steel
and with aluminium or copper bottoms
can cause a colour change on the glass-
ceramic surface.

6.2 Examples of cooking applications

The data in the table is for guidance
only.
of
of
.
of the two front
the function
ENGLISH
9

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis