AVENLI RP2-21-CZ Benutzerhandbuch Seite 11

STEP 3. INSTALLATION OF FITTINGS
Thread each U-shaped fitting through the
additional bottom eyelet
STEP 4. INSTALLATION OF THE HORIZONTAL SUPPORTS
For the long side of the pool:
Support E Support D Support C
For 4 m x 2 m x 99 cm (13' x 6.5' x 39") / 4 m x 2.07 m x 1.22 m (13' x 6.8' x 48"), the combination is E-D-C
Insert the assembled supports into the sleeve, the hole on the supports must face outwards.
For the short side of the pool:
Beam A
For 4 m x 2 m x 99 cm (13' x 6.5' x 39") / 4 m x 2.07 m x 1.22 m (13' x 6.8' x 48"), the combination is A-B
Insert the assembled supports into the sleeve, the hole on the supports must face outwards.
STEP 5. INSTALLATION OF THE HORIZONTAL SUPPORT AND FITTING L
Plastic sleeve
11
T-joint
Beam B