Aux In Mode - auna Oxford SE Bedienungsanleitung

EN
50

AUX IN MODE

Check that your Retro Turntable is in Aux in mode. If you are not already
in Aux in mode, repeatedly short press the SOURCE button to go to Aux in
mode (check the display).
Using a 3.5 mm audio input connection cable (not included), Aux in allows
for a quick and easy connection to an external sound source.
1. Connect one end of the 3.5 mm audio connection cable to the
headphone (or auxiliary out) socket of your secondary device, connect
the other end to the Aux in socket on the front of your Retro Turntable.
2. Press the PLAY button on your external device to start playback through
the Retro turntable speakers. To gain optimal volume levels, adjust the
output volume level on both the secondary device and on the Retro
turntable.
Note: It is recommended that you unplug the Audio cable from the Aux in
socket after you have finished listening to your external device.