Radio System
EN
The radio system always consists of a master and max. 10 slave
devices or controls. The master can be a radio screen with a
connected ventilation unit or a control unit (5/UNI-RF or 5/SC-RF).
The master specifies the operating mode and the stage in the sys-
tem depending on control commands or sensor values and commu-
nicates this to the slave components. Operating parameters are
regularly queried from the slave devices in order to be able to per-
manently guarantee the stability of the system and the radio
connection. During communication, the participants always check
the transmission and reception strength and adjust the transmission
power according to the requirements.
The communication is an encrypted bidirectional communication. It
is ensured that only the devices that have been connected to each
other communicate with each other. To maintain the stability and
synchronicity of the system, data and commands received are al-
ways confirmed by the receiver in the direction of the sender.
12