Lunos 5/UNI-RF Anleitung Seite 11

Technical data
Control
Operating voltage:
Functional voltage range:
Operational switching current: max. 5 A
Connected load:
Radio frequency:
Electrical connection
Safety instructions:
Caution! Any assembly work may only be carried out after disconnecting
the supply voltage!
Before connecting the device to the mains voltage, make sure that all
connection lines are voltage-free (dead)! (Separation from the power
supply with a minimum contact opening of 3 mm, e.g. electric fuse).
Each electric circuit of this ventilation system must be fitted with a resi-
dual current protection (e.g. FI switch/RCCB)!
Electrical connection only by a specialist.
Additional installations and electrical components in the ventilation unit are
not admissable!
Use the following cables for electrical connection:

Cable to the ventilation devices: e.g. J-Y (St) Y 2 x 2 x 0.8 min. 0.5 mm²,
max. 1.5 mm²

Cable for the supply voltage: e.g. NYM 3 x 1.5 mm²
Power supply units
12 V DC Input voltage:
Output voltage:
0 - 10 V
Types:
5/NT18
max. 60 W
868 MHz 5/NT60
5/NT100
EN
100 - 240 V AC
12 V DC
Order No.: 39973
Order No.: 39974
Order No.: 40096
EN
11