Bergstrom DAF COOL ULTIMATE Montageanweisungen Seite 27

DAF COOL ULTIMATE
Fasten the control cover with (2) M6x20
14
countersunk screws.
Caution: Position the connection wiring as
indicated.
Start up the unit and check it works correctly
15
in accordance with the instructions set out in
the User Guide.
Cover the inside panel's (4) outer screws with
16
their plastic caps. Caution: each plastic cap is
identified with a symbol that must match the
symbol marked on the inside panel.
Caution: Each plastic cap is identified with a
symbol that must match the symbol marked
on the inside panel.
27
EN